Building an Orchidarium

I love indoor creating bottle gardens, terrariums, vivariums, orchidariums, and other indoor gardens.  In this article I’ll show you how one of my orchidariums was created.  I hope this feature will help you if you’re considering creating an orchidarium, vivarium, terrarium, or other lovely indoor garden of your own.

The Glass Case

It’s entirely possible to build your own glass case, but it’s a complicated and labour-intensive process, which I decided to avoid on this occasion.

There are a large selection of new and second hand, pre-built vivariums available for sale, many of which have been designed and marketed for keeping dart frogs, geckos and chameleons in, happily most of these terrariums are also suitable for growing plants inside.

On this occasion, to create this orchidarium, I opted for an ExoTerra Natural Terrarium Medium/X-Tall, which you can see pictured below.

A photo of the Exo Terra terrarium

The ExoTerra Natural Terrarium Medium/X-Tall. The terrarium measures 60cm x 45cm x 90cm (W x D x H) and comes with a wire mesh lid, opening doors, air vents and cable guides. There is also a natural looking polystyrene backdrop which I have removed in this photo.

This ExoTerra Natural Medium/X-Tall Terrarium is 90cm tall, 60cm wide, and 45cm deep, which is the perfect size for the location where it will be placed.  This ExoTerra Terrarium was supplied by Northampton Reptile Centre.  The people at the Northampton Reptile Centre were friendly and helpful – my first terrarium arrived with a crack across its rear glass panel, happily the Northampton Reptile Centre sent me out a replacement terrarium which arrived the following day.

This ExoTerra Natural Medium/X-Tall Terrarium, features lockable glass doors, a ventilation panel at the front, a sealed water-tight area for a reservoir at the base of the terrarium, as well as cable guides for any electronic equipment, a removable wire mesh lid for ventilation at the top, and slightly raised feet (useful if you want to place a heat-mat under the case).   This terrarium also comes with a polystyrene, rock-effect backdrop, which I decided not to use on this occasion.

Creating a False Bottom

It’s important that this orchidarium offers a humid environment, with excellent growing conditions for the orchids that I wish to grow inside.  I plan to line the bottom of this orchidarium with cushion moss.  I decided to use what is known as the ‘false bottom’ technique – where a raised platform is used to support the main landscape of the terrarium, with a reservoir of water underneath.

The simplest way to create this false bottom is to use plastic grids, which are known as ‘egg crate’.  Egg crate can easily be cut to size with a sturdy pair of scissors.  Egg crate is available from aquarium suppliers, although I found mine on eBay.  Each egg crate panel has lugs and slots, which allow them to be combined to construct a larger area.  By adding upright panels around the sides, I constructed a ‘basket’ shape made of egg crate, which will hold the compost.  To build the basket, I used zip-ties, which are strong, quick, and simple to use.

The egg-crate basket, with pipe feet to raise it up and create a reservoir.

The egg-crate basket is raised up off the base of the tank using short lengths of plastic plumbing pipe, also attached to the egg-crate with zip-ties.

Detail of egg-crate used in terrarium construction

Egg-crate basket detail showing zip-tied construction of the basket and pipe feet

Please note that it’s important to drill a few holes around the base of the pipes, so that any water within the reservoir can move freely in and out of the pipes – this is to prevent the plastic pipes filling up with stagnant water, which might encourage a build up of unwanted conditions at the base of the orchidarium.

Drilled pipes used to raise the egg-crate basket

Egg-crate basket detail showing drilled holes in the pipe feet to ensure water can circulate and does not get stagnant.

Once complete, the basket is ready to position in the tank.

The completed egg-crate basket.

The egg-crate basket in position. You can see the space below it which will stay as a water reservoir.

The next step is to ensure the compost and moss will remain moist.  I lined the basket with a piece of landscape fabric, then I laid capillary matting over the top.  I ensured that the capillary matting had long over-hangs, these overhangs will drape down into the water reservoir below, taking up water, to moisten the compost above.  I used the peat free compost from BiOrb as the compost inside my Orchidarium.

The basket lined with landscape fabric and capillary matting, which drapes down into the reservoir.

The capillary matting isn’t a beautiful feature, so I added a screen of black landscape fabric around the sides of the base of the orchidarium, to improve the aesthetics.  The dark colour of this landscape fabric will also help to reduce the amount of light entering the orchidarium’s water reservoir – this will help to prevent the build-up of algae at the base of the orchidarium.

At this point, I also inserted a small plastic tube, through the landscape fabric, down into the reservoir – this is to ensure that I will have the option to easily drain the reservoir, and replace the old water, with fresh rainwater when necessary, without having to dismantle the entire base of the orchidarium to do so.

The drainage pipe for replacing the reservoir water. You can also see the ventilation holes at the base of the doors of the Exo Terra terrarium.

Detail showing the drainage pipe which can be used to drain the water in the reservoir, if it needs replacing.

Constructing the Landscape

With the basics of the orchidarium now in place, the next stage is to landscape it.  It’s possible to create all kinds of original, complex, and attractive landscapes within a terrarium – some people use rocks or branches which have been siliconed to the back and sides of the terrarium.  Another option is to use expanding foam, which can be sculpted to your own design, and then covered with coir compost and moss to create an attractive backdrop for the orchids.  I decided not to add any permanent fixtures at this stage, which allows me the opportunity to change things, should I wish to.

I purchased some large, sculptural pieces of cork bark from Porters Foliage in New Covent Garden Market, which I cut to size to fit inside this orchidarium.  I used an extra piece of egg crate to support the cork bark, and prevent the cork from damaging the capillary matting or landscape fabric below.

Detail of the base of the cork bark sculpture on egg-crate.

Positioning the cork bark within the terrarium.

I positioned large pieces of flat, cork bark at the back of this orchidarium, to provide a backdrop to the cork and plants in front.  This cork will provide additional locations to mount orchids inside this orchidarium.  I then filled the egg crate basket at the base of the orchidarium with coir compost, I positioned cushion moss on top, to create the base of the landscape for this orchidarium.

The Orchidarium with the cork and moss in place. The first orchids, a selection of restrepias, have been mounted.


I chose LED lights, which produce a good colour temperature for plants, with light that is around 6500K – and is very similar to natural daylight.  LED lights use very little power, and produce almost no heat as they operate.

I opted to use the Advanced LED Lighting System by Jungle Hobbies.  These lights have a built-in timer, and are programmable with 5 light stages (dawn, sunrise, daylight, dusk, sunset) this gives a good range of light levels and colour temperatures throughout the day.

The Jungle Hobbies Advanced LED Lighting System.

The Jungle Hobbies Advanced LED Lighting System – showing the clock at one end of the light.

The Jungle Hobbies Advanced LED Lighting system can be controlled and programmed by a handy remote control.

The Jungle Hobbies Advanced LED Lighting System. This picture was taken with the lights in ‘sunset’ mode – the main white LEDs are dimmed, and supplemented with a range of coloured LEDs to give a warm evening glow.

Humidity and Ventilation

The Exo Terra terrariums come with a wire mesh lid, this provides an opening for airflow circulation and air exchange within the terrarium.  It’s important to have good air circulation and to allow for air exchange within the terrarium, but having such a large, open entrance and air exchange area has drawbacks, resulting in the humidity levels dropping at a fast rate, which is not good for the moss and the orchids I plan to grow inside – most of which would prefer to be at 60-70% RH (relative humidity).

To prevent the humidity levels dropping so quickly, I initially looked into having a glass lid made for this orchidarium, but this was prohibitively expensive.  I then found a company, Aquarius Plastics, that were able to cut and polish a piece of 6mm clear acrylic to the right size and shape to fit the top of the orchidarium.  The design I created for the lid includes:

  • Notches in the rear corners to allow cables/pipes in and out.
  • Notches in the front corners to accommodate the curve of the door hinges.
  • A square hole to seat the external ventilation fan.
  • A round hole which is currently plugged, but I may use in future if I set up a fogging unit to improve humidity.

The replacement lid for the ExoTerra tank – a piece of 6mm clear acrylic, cut to shape, with fitment holes for the MistKing misting system nozzles, and notches at the corners for the cable guides and front hinges. The square hole is for the external fan, and the round hole allows me to add a fogging unit in future, should I wish to.

Orchidarium fans

Ventilation in the orchidarium is essential.  It’s important to have air movement within the orchidarium, as well as air-flow into and out of the orchidarium.  To achieve this, I’ve installed two fans:

  • An external fan sited in the acrylic lid – this will push air out of the top of the glass tank, and by doing so will draw fresh air in through the ventilation holes in the bar across the front (just below the doors).
  • An internal fan in the top corner of the tank, which will circulate the air within the orchidarium and ensure consistent humidity throughout the entire tank.

I purchased two small, quiet, cooling fans made by AC Infinity – but any small computer fan would be suitable.  The fans are powered via USB cables, and can be daisy-chained, so only one power adapter is required.  They also have individual speed switches with low, medium, high, and off settings.

The internal fan will run constantly, moving the air around inside the orchidarium and ensuring a consistent humidity level in all areas of the tank.  Choosing how often to run the external fan, to draw in new fresh air, is more complex – as any new air pulled into the orchidarium will result in the humidity dropping.  I decided to manage this by connecting it to a Hygrostatic controller – which will run the fan when there is plenty of humidity, but ensure that if the humidity drops below, say, 75% RH, the external fan will switch off – thereby preserving the humid environment for the plants.

The interior fan used to circulate air within the terrarium. The fan is attached to the glass by small suction hooks.

The two fans in position, one cut into the acrylic lid to allow external air exchange, and the other for internal air circulation and movement.

The external circulation fan which drops into the hole in the acrylic lid, and allows air to be moved out of the tank, drawing fresh air in through the front ventilation holes just below the doors of the ExoTerra terrarium, providing good air exchange within the terrarium.

Misting System

For this orchidarium’s misting system, I chose to install the MistKing Misting System (which is also produced by Jungle Hobbies).

The MistKing Ultimate Misting System is a starter pack with everything you need to set up an automatic misting system for a terrarium.

There aren’t many MistKing suppliers in the UK.  Jungle Hobbies have an EU office, and so were able to ship the lights and misting system to me within a couple of weeks.

Setting up the misting system for the first time is very straight forward – the instructions are very clear.  The plastic pipe just pushes into the fittings for the pump and misters – although while testing this for the first time, I found that a couple of the connections didn’t have a watertight connection, which left me with a puddle of water.  Simply pushing the pipes further home to make a proper, watertight connection solved this problem.

The MistKing pump. The unit on the left is the DripZip which maintains pressure and allows the system to run with circular flow, giving immediate water pressure at the misters when the pump activates. To keep things neat and tidy, I’ve put the pump and power adapters into a box with notches cut out for the cables and pipes. Another option is to put them inside the cabinet, or stand, on which the terrarium is placed.

The misting system comes with a good timer which can be programmed to automatically mist the tank at various times throughout the day.  It’s also possible to control the misting system with an alternative hygrostatic controller to maintain a particular humidity range, if you want.

The MistKing seconds timer, showing the current time, and the next misting programme. The misting system can be activated manually by holding the ‘up’ button for five seconds.

The misting system doesn’t come with a water reservoir, so I have used a black bucket with a lid (which will keep the dust and light out).  Fitting the bulkhead to the bucket is very straightforward.

A simple bucket with a lid, drilled to fit the bulkhead, makes a great reservoir for the misting system.

Detail showing the bulkhead fitted into the bucket through a small hole. This allows the pump to be gravity-fed, ensuring the pump primes itself quickly each time it runs.

The three MistKing misting system nozzles fit through the custom-drilled holes in the acrylic terrarium lid, and can be directed to form a fine mist cloud across the entire tank.

Each MistKing misting nozzle produces a fine mist of 50 micron droplets.

Here is the orchidarium filled with orchids, mosses, and ferns.  It’s not entirely finished yet, I have some tweaks I wish to make, but thought I’d show you what this orchidarium looks like now.

The orchidarium, fully planted with miniature orchids and some ferns.

Phalaenopsis lowii.

Restrepia purpurea ‘Rayas Vino Tinto’, pictured inside my Orchidarium.

You can see the Planting List for this Orchidarium, which includes details of where I have purchased all of the plants, ferns, moss, cork, for this terrarium, you’ll also find information about each of the plants inside this Orchidarium here.  On the 11th November 2017 I rearranged many of my terrariums, including this Orchidarium, the Orchidarium Planting List reflects this update, as well as displaying any plants that have previously been grown inside this Orchidarium, any plants that I add in future will also be added to this list.

You can read about the Aerangis luteo-alba var. rhodosticta specimen that’s growing inside this Orchidarium and see its flowers, by clicking here.

You can read about the Gastrochilus retrocallus specimens that are growing inside this Orchidarium, and see their flowers, by clicking here.

You can read about the Phalaenopsis honghenensis specimen that’s growing inside this Orchidarium, you can see the plant in flower and find out more about its fragrance, by clicking here.

You can see the Restrepia citrina specimen that is growing inside this Orchidarium and find out more about the plant and see its flowers, by clicking here.

The planting list for this Orchidarium is currently as follows:

  • Aerangis lueto-alba var. rhodostica
  • Aerangis mystacidii
  • Athyrium species
  • Bulbophyllum ambrosia
  • Bulbophyllum sessile
  • Ceratochilus biglandulosus
  • Dinema polybulbon
  • Doryopteris cordata
  • Gastrochilus retrocallus
  • Humata repens
  • Lepanthopsis astrophora ‘Stalky’
  • Leptotes bicolor
  • Oncidium hians
  • Ornithophora radicans
  • Pellaea rotundifolia
  • Phalaenopsis appendiculata
  • Phalaenopsis honghenensis
  • Phalaenopsis lobbii f. flavilabia
  • Phalaenopsis lowii
  • Phalaenopsis malipoensis
  • Phalaenopsis parishii alba
  • Phalaenopsis stobartiana
  • Phalaenopsis thailandica
  • Phalaenopsis wilsonii
  • Platystele examen-culicum
  • Pyrrosia serpens
  • Restrepia antennifera
  • Restrepia citrina
  • Restrepia purpurea ‘Rayas Vino Tinto’
  • Restrepia sanguinea
  • Restrepia seketii
  • Restrepia trichoglossa
  • Schoenorchis fragrans
  • Schoenorchis tixieri
  • Stelis muscifera

This Orchidarium is planted with ferns, mosses, and orchids.

To head straight to my first Orchidarium update and discover how the plants inside this Orchidarium grew and developed, and how the products I used performed from April 2017 to December 2017, please click here.

To head straight to my second Orchidarium update, where you can discover how the plants inside this Orchidarium grew and developed, and how the products I used performed from December 2017 to April 2018, please click here.

To head over to my third Orchidarium update, where you’ll see an update from April 2018 to August 2018, please click here.

Further Trials

You may be interested in some of the other trials I have conducted.

Terrarium, Vivarium, and Orchidarium Trials

To read about how I set up my Rainforest Terrarium and see the features of this terrarium and learn about the thinking behind my design, please click here.

To read how I track the temperature, humidity, and light conditions inside my terrariums, please click here.

To read the first part of my White Orchid BiOrbAir Terrarium Trial, please click here.

To read the first part of my Madagascar BiOrbAir Terrarium Trial, please click here.

To read the first part of my Miniature Orchid BiOrbAir Terrarium Trial, please click here.

To read about the general care I give to my orchids and terrarium plants, and the general maintenance I give to my BiOrbAir terrariums, please click here.

You’ll find lots of articles about how to set up a terrarium, orchidarium, vivarium, or bottle garden, here.

Compost Trial Reports

To see all of my Compost Trials, please click here.

To read advice on planting up containers, please click here.

Sweet Pea Trial Reports

To read the results of my 2017 Sweet Pea Trial, please click here.

To read the results of my 2016 Sweet Pea Trial, please click here.

To read the results of my 2015 Sweet Pea Trial, please click here.

Scented Daffodil Trial Reports

To read the results of my 2018 Scented Daffodil Trial, please click here.

To read the results of my 2018 Scented Daffodil Container Trial, please click here.

To read the results of my 2017 Scented Daffodil Trial, please click here.

Orchidarium Planting list

The Orchidarium Planting List displays every plant that has been grown inside this terrarium so far, even plants that are no longer growing inside this Orchidarium and have now been moved to other terrariums are shown on this list.  Any plants that I decide to grow inside this Orchidarium in future will be added to this planting list.  The Orchidarium Planting List includes information on each of the plants – you can click on a plant to see links to every article I have written about that particular plant species.  I have also listed all of the nurseries and suppliers that I used to purchase all of my plants, mosses, and cork for this Orchidarium, at the bottom of this planting list.  You can see the full planting list for this Orchidarium here.


To feed my miniature orchids, I use Orchid Focus Grow and Orchid Focus Bloom.  I purchased both of these fertilisers from the shop at The Royal Botanic Gardens, Kew.  I feed my orchids sparingly, following the instructions on the pack.  These miniature epiphytic orchids wouldn’t naturally receive an abundance of nutrients in their natural environment.

Other articles that may interest you………….

To read about Phalaenopsis honghenensis, please click here.

To read about Aerangis luteo-alba var. rhodosticta, please click here.

To read about Restrepia citrinaplease click here.

To read about Gastrochilus retrocallusplease click here.

To read about the new features of the 2017 BiOrbAir Terrarium, please click here.

To read about using decorative features inside your terrarium, please click here.

To read about long handled terrarium tools, please click here.

To read a planting list of a wide variety of beautiful plants suitable for growing in a terrarium, bottle garden, vivarium, or orchidarium, please click here.

To see a list of miniature orchids, suitable for growing inside terrariums, bottle gardens, vivariums, or orchidariums, please click here.

To read about the largest known orchid in the world, please click here.

Other articles you might like:

One thought on “Building an Orchidarium

  1. Charles

    September 28, 2017 at 1:16am

    Great article, the only thing I’ll mention is that plexiglass (acrylic) will definitely warp significantly when exposed to one sided humidity. Polycarbonate (lexan) will not and stay flat.

    It may or may not be much of a concern depending on the conditions that you are trying to achieve within the tank

    • Author

      Pumpkin Beth

      September 29, 2017 at 8:29am

      Hello Charles,
      Thank you for your message. So far it hasn’t been a problem, as the top isn’t bearing any weight and isn’t needed to be lifted off and on again. If I was creating a much larger terrarium, then as you suggested, polycarbonate or even glass would be a better alternative. This terrarium was created over six months ago now, and thankfully there have been no problems so far.
      Thank you so much for your suggestion, I appreciate it.
      Best wishes

  2. Ian

    January 24, 2018 at 4:39pm

    Perhaps the best step-by-step tutorial on building a large orchidarium that I’ve found. Well done!

    Some initial questions, as I am going to be tackling something similar myself soon…

    1) How do you keep the water in the bottom of the orchidarium from going “bad” and/or growing algae? I was thinking it might be a good idea to keep the water down there in motion via some sort of pump. Thoughts?

    2) Do you have any issues with algae growth on the glass? If so, how do you handle it.

    3) For feeding your mounted orchids that cannot be removed from the orchidarium, do you just use a nutrified mister?

    Thanks again for such an informative and inspirational article!


    • Author

      Pumpkin Beth

      January 24, 2018 at 6:05pm

      Hello Ian,

      Thanks for your compliments, I am so glad that you found my article helpful.

      In answer to your questions, I installed this Orchidarium in the beginning of March 2017, so far I have not experienced any problems with the water in the bottom of the Orchidarium, or any problems with algae. I have tried to ensure that as little light as possible is able to reach the water. I have installed a plastic tube to allow me to easily drain the water so that I can check its quality. This tube allows me to remove and drain all of the water as easily as possible should a problem arise and I wish to replace the water.

      So far I have not had a problem with algae growth on the Orchidarium glass. If I did have a problem, the orchids on the glass can all be easily removed, allowing the glass to be thoroughly cleaned, and then the orchids can be put back again. In my design for this Orchidarium I have made it as easy as possible to remove each of the plants.

      I have two separate hand held misters that I use for feeding the orchids, I simply do this by hand, it doesn’t take long at all, and as the two doors open at the front of the Orchidarium, this provides easy access to all of my plants. I haven’t tried feeding the orchids via the misting system, simply because I know that feed has more of a tendency to clog a hand held mister. Apart from the feeding of the plants, all of the watering and misting the plants need is provided by the Orchidarium automatically.

      I hope this answers all of your questions. Good luck with your project – I hope you find some of my ideas to helpful.

      Best wishes, Beth

      • Ian

        January 24, 2018 at 6:53pm

        Many thanks for your clarifications, Beth. Your answers definitely help!


  3. Behrooz

    February 1, 2018 at 4:51pm

    Thank you very much Beth for your informative practical guide! Actually the best one in the net. I am building mine based on your guide

    • Author

      Pumpkin Beth

      February 2, 2018 at 1:56am

      Hello Behrooz, thank you very much for your kind compliment! I am so glad that you’ve found my article about how my Orchidarium was created to be helpful. Good luck with your orchidarium plans. I have hopefully linked all of my related articles to this one, but do look for my orchidarium update, my article about how I track my growing conditions, my planting lists, and my other terrarium trials and related articles, I hope they will help you too. Wishing you every growing success! Best wishes, Beth

  4. Janiarto

    May 28, 2018 at 7:26am

    this is very informative, i’ve just thinking to make something like this,

    • Author

      Pumpkin Beth

      May 28, 2018 at 3:22pm

      Thank you Janiarto, I am glad you found the article to be helpful. Good luck with your project! Best wishes, Beth

  5. Kevin Dillon

    June 27, 2018 at 10:23pm

    Hi Beth, great blog! I love this detailed description of your Orchidarium build! I was curious if you have worked out a mechanism to increase the difference between day and night time temps in the Orchidarium. I see you have lighting and humidity worked out but was curious if you see enough of a difference in temperatures in the Orchidarium daily to coax your orchids into flowering. I have heard that they like at least a 10-15 degree Fahrenheit difference for optimal growth and flowering but this is always a challenge when growing indoors. Thanks! I can’t wait to absorb everything else your pages have to offer.

    • Author

      Pumpkin Beth

      June 27, 2018 at 10:44pm

      Hello Kevin,

      Thank you for your comment. We have our central heating low, so particularly in the winter at night the temperature can drop from 20C down to about 17C which isn’t a huge difference, but it helps. I do have a room which is kept much cooler in winter, specifically for the benefit of my plants, but this Orchidarium resides in a warmer room, which has a higher temperature range. It’s interesting to see how the plants grow with a more subtle difference in the temperatures between night and day, and to see how this affects the plants. This Orchidarium holds many young plants, quite a number of the orchids inside have flowered (for most of these plants it was their first flowering) although there are still a number of orchids which haven’t flowered at all, as well as a few orchids that produced buds which have aborted.

      One of the other things I have with one of my BiOrbAirs is to put it in the corner of the room, next to an external vent, where it gets very cool indeed at night. That globe can then be for plants which need a very cool place in order to flower, as this terrarium will get down to about 12C at night.

      Whether my plants are growing wonderfully, or abysmally, I will let you know in my regular updates!

      Best wishes

      • Kevin Dillon

        June 28, 2018 at 2:29am

        Sounds great Beth. Yeah it will be interesting to see if your cooler growing ones fare better and bloom once you get them in a cooler environment or one that achieves a bigger daily temp differential. Either way I’ll look forward to the updates!

  6. Julie Kennedy

    July 29, 2018 at 5:52pm

    I cannot thank you enough for the detailed information you’ve provided for your orchidarium build. Having scoured the internet, it is always your blog I return to!
    I am just building my own orchidarium, using mostly your plans – for growing some rare Hoyas – particularly Hoya stenophylla, rediscovered in Papua New Guinea in the early 2000’s, for the first time in nearly 100 years. Sadly when the collector returned a few years later, the whole area had been devastated by ‘slash and burn’ farming, destroying the tree upon which the plant was found. I’m hoping that the few of us trying to grow this little beauty will be able to return it to the wild someday:)

    Never having built an orchidarium before, your planting lists have been invaluable – even though some of your choice plants are incredibly difficult to obtain, I have been able to source similar. I am including a couple of masdevallia in honour of our late aunt and uncle who were intrepid explorers in the fifties and sixties, and never missed a World Orchid Conference. They were favourites of his! So all in all, not only have you set me on a small conservation path, but we’ve had a lovely time reminiscing too.
    Thank you again

    • Author

      Pumpkin Beth

      July 29, 2018 at 6:01pm

      Dear Julie

      Thank you so much for your lovely message Julie – you have made my day! I am thrilled to know that my plans have helped you so much. I have my fingers crossed that you will be able to successfully conserve the Hoyas. I hope with all my heart that you will be able to successfully re-introduce the wild Hoya species back to where they came from. I wish you every success with your growing!

      Kind regards and best wishes

  7. Kevin Dillon

    September 14, 2018 at 2:19am

    Hey Beth, another question for you. Have you found the suction cups to be effective long term at holding your mounts in place? I assume the mounts aren’t that heavy but have you ever had any suction cups break free? I really want to avoid putting in an obnoxious lattice to hang my Pleurothallid pots on and I like the idea of suction cups. Thanks!!


    • Author

      Pumpkin Beth

      September 14, 2018 at 2:27am

      Hello Kevin,

      I have found the suction cups to work really well for all of my miniature orchids. For my small orchids I have used two suction cups per plant, to avoid the weight of the plant being too heavy for the cup. So far I haven’t had any problems. I think they would work well for your plants as long as they’re not too heavy. You could always try it out for one or two plants and see how you get on. I have quite a number of plants hung in this manner, I have only had one or two slip down on occasion.

      Good luck!

      Best wishes, Beth
      PS. Don’t miss my recently published article about my set up and the design of my Rainforest Terrarium!

      • Kevin Dillon

        September 14, 2018 at 3:18am

        Awesome I’ll do some experimenting!

  8. Malcolm Storey

    January 15, 2019 at 10:55am

    It was only a matter of time… I read this article a couple of months ago and found it really inspiring. My ExoTerra Paludarium has just arrived!

    • Author

      Pumpkin Beth

      January 15, 2019 at 9:08pm

      How exciting Malcolm! I wish you every success with your new Paludarium!
      Best wishes, Beth

  9. Malcolm Storey

    January 21, 2019 at 12:15pm

    I’m trying to buy the MistKing system. offers it at 129 Euros plus 65 for the “Plus Pack” (ie 194). The UK distributor charges £169 but doesn’t offer the PlusPack: if you add the bits individually it costs another £100 (ie £269). rejects purchases from the UK – I’m trying to think who I know on the continent!

Your email will not be published. Name and Email fields are required